Designed to be used for pH control
where Chlorine Generator (Salt System)
is installed.
INCLUDES: Controller, flow cell with flow
switch, pH probe, 3/8” tubing, fittings.
|
- Probes: One-year limited warranty
- Controller: One-year limited warranty
on electronics
- NOTE: It is recommended that an in-line
filter system be used before the flow cell
|
INCLUDES: Controller, flow cell with flow switch, pH probe, 40’ of 3/8” tubing, fittings and one 32 GPD peristaltic pump.
• Mounting board is pre-drilled and ready to mount on wall
• NOTE: This system is designed to control pools up to 100,000 gallons. Larger pools may require
larger GPD peristaltic pumps
• NOTE: It is recommended that an in-line filter
system be used before the flow cell (Click Here)
|
|
- pH Monitoring from 6.8 pH to 8.2 pH
with .1 pH Resolution
- Set Level from 7.0 pH to 8.0 pH
- Dosing Options from Continuous to up to 15 Minutes
- Factory Set 5 Minute Delay in Timed Feed Mode
- Factory Set High (8.0 pH) and Low (7.0 pH) Alert Levels
- Single Button Calibration
- Overfeed Alert after 30 Minutes in Continuous
Feed and 30 Feed Cycles in Timed Feed Mode
(Requires Hard Reset)
|
- Easy to Read, Sun-Bright LED Display
- Configure for Acid or Base (Jumper)
- Compact Package (Approx. 7” x 5” x 3”)
- Configured for 120 VAC (Input/Output)
- Flow Switch Compatible
- Bright LED Indicators for Feed, Alert and Flow
- Manufactured in the USA
|
