Generation II Digital Controllers2018-11-21T18:25:44+00:00

Generation II Digital Controllers

RC554XP P/N 554000

Digital pH/ORP Controller

INCLUDES : Controller, flow cell with flow switch, probes, 3/8" tubing and fittings.

Download Digital ORP/pH Digital Controller Operating Manual
 
pH ORP Feed Cycle
Factory Setting: 7.4 650 mV .6 sec.
Display Range: 6.8 – 8.2 0 – 995 mV
Setpoint Range: 7.0 – 8.0 400 – 900 mV
Feed Cycles: .6 to 900 sec with 5-minute analyzation periods
Power: 120V corded (input/output)
Feed: Timed or Continuous
Maximum Amps: 5 Amps

 

RC554XXP P/N 554300

NEW! Digital pH/Dual ORP Controller

INCLUDES : Controller, flow cell with flow switch, probes, 3/8" tubing and fittings. Used to control two sanitizer sources.

Download Dual ORP/pH Digital Controller Operating Manual

pH ORP ORP2 Feed Cycle
Factory Setting: 7.4 650 mV 640 mV .6 sec.
Display Range: 6.8 – 8.2 0 – 995 mV 0 – 995 mV
Setpoint Range: 7.0 – 8.0 400 – 900 mV 400 – 900 mV
Feed Cycles: .6 to 900 sec with 5-minute analyzation periods
Power: 120V corded (input/output)
Feed: Timed or Continuous
Maximum Amps: 5 Amps

Output Rates

Model Minimum Feed Rate/24hr Maximum Feed Rate/24hr
RC-252 SC .01 GPD .9 GPD
RC-25/53 SC .10 GPD 12 GPD
RC-103 SC .34 GPD 38 GPD
Recommended Volume of Spa Water to be Treated (Gallons)* Recommended Volume of Pool Water to be Treated (Gallons)* Maximum Volume of Water to be Treated (Gallons)* - Per Caliofornia Building Code Title 24
500-2,500 2,500-5,000 3,000
2,500-25,000 5,000-65,000 40,000

 

Digital pH/ORP controllers Feature:

  • Digital readouts
  • ORP technology
  • Redox sensor
  • Proportional feed or continuous feed
  • Dip switch programmable settings
  • Lockout security feature (RC554XP only)
  • Built-in out-of-range safety timeouts
  • pH calibration
  • Acid or base feed
  • Microprocessor logic
  • Globe flow cell with flow switch
  • Compatible with most peristaltic pumps
  • Can also be used with erosion feeder/solenoid applications
  • Manufactured in the USA

One-year limited warranty on Controller electronics and probes

NOTE: It is recommended that an in-line filter system (part number 550591) be used before the flow cell.